Aging equipment and extreme heat helped spark a fire at a BART substation Tuesday night, the effects of which continue to plague the system, a top agency manager said Thursday.
BART’s Assistant General Manager of Operations Sylvia Lamb told the transit agency’s board of directors at their regular meeting that the fire started after an HVAC unit in a substation room failed.
Lamb said the substation, which is near the Daly City station, is at least 40 years old, and the equipment’s age was also likely a factor in the failure and conflagration, BART officials said in a social media post.
The fire damaged the substation, train control equipment and a traction power cable, which resulted in a two-hour transbay service disruption Tuesday night.
Trains are still running at reduced speeds between Daly City and Colma while crews make repairs, according to BART officials.
“BART has also been shortening service on some lines to reduce the number of trains travelling near Daly City, which is a complicated area of track interlockings and train movement,” BART officials said. “BART is reducing the number of trains that move through that area because the track switches currently can’t be moved remotely.”
The Yellow, Red, Blue and Orange lines are running on normal schedules, but there is still no Green Line service.
BART officials said Green Line riders can use other lines and transfer to get to their destinations, which people will likely have to do for the rest of the day Thursday.
All 50 of the system’s stations remain open.
“A timeline for complete repairs and the return to five-line service is still unknown,” according to BART officials.
In addition to Tuesday’s fire, other problems have bedeviled the system this week.
BART service was halted between the San Francisco International Airport and Colma stations earlier Thursday because of a train control equipment problem near South San Francisco, causing major delays for riders on the Yellow and Red lines.
The transit agency issued an alert shortly after 7:10 a.m. about the problem and said riders were directed to shuttle trains that were running between the Millbrae and SFO stations, and between the SFO and San Bruno stations. SamTrans was also providing service on the ECR bus route, with stops between the Millbrae and Colma stations.
On Wednesday, there was a major delay on the Dublin/Pleasanton line because of a PG&E outage between the Castro Valley and Dublin/Pleasanton stations.
